Heat Exchangers

Info Request
LED Lights Overview
Solar Powered Floodlight
Solar Dock Light
12v Power Supply

Solar Lighting Controller

Info Request

Solar PV Systems Overview

meeting the Ontario FIT Content requirements

CSA Approved Solar Panels
Grid Tie Inverters
Solar Panels Not CSA Approved
Solar Controller
Power Inverters for Off Grid
Solar Pathfinder
Batteries
CirculatingPump
Solar Circulation
Pumps
Water Pumps
 

 
FAQ
 
 
 
Canadian Solar Rebates and Incentives
 
Warranty Return
 
 
 
 
Dealer Login
Site Map
 

Solar Water Heaters

WSE BC Flat Plate

Pressurized Solar Water Heater

Click for Information and Pricing on WSE Flat Plate Solar Heater

The design and materials used in the absorber have a significant impact on the panels performance.

WSE flat plate solar collector uses very high quality copper elements, and the Blue Coating surface permits absorption of the suns rays even in overcast weather. The thermal glass with a low iron content, is sealed by using heat-resistant rubber seals. The panel is thoroughly insulated by using fibre glass to limit heat loss, and the frame is made from anodized aluminium. With textured aluminium sheet on the rear side, the total design is extremely resistant to atmospheric impacts and temperature variations.

Description
Specification
 
Model Number
WSE BC Flatplate
 
Net Dimensions L*W*H
     2010mm * 1010mm*80mm  
Net Weight
41 kg
 
Cover Material
Low Iron Textured Tempered Glass
 
Cover Thickness
4mm
 
Cover Transmission
85%-87%
 
Absorber Dimension L*W
1840mm * 123mm * 8pcs
 
Absorber Material
Red Copper
 
Selective Absorber Layer
Titanium - Nitrite - Oxide
 
Welding Method
Ultrasonic Welding
 
Heat Carrying Liquid
Antifreeze/Water
 
Heat Carrier Volume
1.9L
 
Absorption
95%
 
Reflective Capacity
Q8%
 
Insulation Material
Fibre Glass
 
Insulation Thickness
30mm
 
Frame Material
Aluminum Alloy
 
Frame Colour
Silver/Bronze
 
Working Pressure
6 Bar
 

Testing Flat Plates in Saskatchewan

The system was operated over a one month period in March and April when temperatures were at times lower than -20º C. Figure 3 shows typical results from March 10, 2008.

Figure 3- Solar heat as a function of time.

A number of conclusions can be reached from this test:

  • The peak solar efficiency of theflat panel is about 66%. This is lower than the evacuated tube panels which can reach 95%.
  • The heat output is dependant on the solar angle during the day
  • The heat output is fairly independent of ambient temperature
  • The panel is suitable for a domestic hot water heating system
  • The clear synthetic cover is impact resistant
Using a 12 volt automotive battery and solar panel this system can operate in remote areas where no power is available

Save money on solar, sign up below and receive special discounts and receive what is new in solar information

Our Free Webinars can be attended or we can email you the webinar so you can view at your leisure including PDF's

We offer a full range of webinars that can assist in making smart decisions regarding solar.

Sign up now and get these free webinars in the next 24 hours with over 10 different webinars

What makes sense in Solar - the truth about solar voltaic, wind turbines solar water heating, led lights and geothermal

Sign up for Newsletter NOW

 

Ready to order or have some questions?

Simply pickup the phone and call 1 306 244 8808

(Barry  ext 242 ) (  Brayden ext 239) (Lee ext 232)

Click here to Contact WSE

 

Become A Dealer

Become involved with a dynamic company and dynamic industry that will see exponential growth and opportunities over the next 20 years. The key is to get in NOW before it is too late.

  Talk to our President Larry Fedoruk 1 306 244 8808 or Email

Information about become a dealer click here

WSE Technologies
303 - 47Str. E
Saskatoon
Saskatchewan
Canada
S7K 5H2

Ph: 1 306 244 8808
Fax: 1 306 244-9970

We accept Visa and Master card.

WSE twitter